Use the links below to jump to a section, or continue reading for the full article. You can also view the full specifications, image gallery, charging performance, and online reviews. Sections:
Alternative Models
The Leapmotor B10 67.1 kWh alongside these alternatives:
Performance
The Leapmotor B10 67.1 kWh has a maximum power of 160 kW (218 hp / 215 bhp) and a total torque of 238 Nm (176 lb-ft). It accelerates from 0 to 100 km/h (0 to 62 mph) in 8 seconds and reaches a top speed of 170 km/h (106 mph).
Battery, Range, and Charging
The battery has a gross capacity of 67.1 kWh and a net usable capacity of 65.0 kWh, with a 2.1 kWh buffer (3.1%) for battery protection.
The lithium-ion battery uses LFP technology, which has different characteristics from typical NCA and NMC batteries.
According to the WLTP (Worldwide Harmonized Light Vehicles Test Procedure) standard, the vehicle's range is 434 km (270 miles), with an energy consumption rate of 15.0 kWh/100 km (4.1 mi/kWh).
For more details about the range, see real-world data and range listings on this model’s range and consumption page.
The vehicle supports fast DC charging with a maximum power of 168 kW. A 0–100% charge takes approximately 77 minutes. A typical 10–80% session takes about 30 minutes at an average power of 90 kW.
With five minutes of overhead per stop, the optimal charging window is 5–50%. Effective average power, including overhead, is 92 kW over a session lasting about 19 minutes and 4 seconds.
In a 1000 km challenge at a constant speed of 120 km/h (75 mph) with an assumed consumption rate of 22 kWh/100 km, the trip would take about 10 hours and 2 minutes, needing six charging stops from 6% to 46%, totaling 102 minutes of charging time.
Onboard Charger
The standard onboard charger supports AC charging at up to 11 kW. A full 0–100% charge takes about 5 hours and 54 minutes with a suitable home charging setup.
Charge Port
The location of the charge port is on the right rear side. This placement makes it easy to use charging stations that require backing up to connect.
Drivetrain
The Leapmotor B10 67.1 kWh has a rear-wheel drive system supported by one motor on the rear axle.
The motor used is Permanent Magnet Synchronous Motor.
Suspension
The suspension system features a MacPherson strut front construction and a multi-link rear construction. Both the front and rear dampers are monotube dampers. The front and rear springs are coil springs.
The standard suspension has a fixed height and damping characteristics.
Ground clearance with this setup is 170 mm.
Configurable Driving Characteristics
While this vehicle does not feature predefined drive modes like Sport or Comfort, it still offers drivers the flexibility to fine-tune individual aspects of the driving experience. These settings allow you to tailor the vehicle's behavior to match personal preferences or specific driving conditions.
- Steering feel – Modify the steering weight and feedback for comfort or precision.
- Throttle response – Choose how aggressively the car responds to accelerator input.
Brakes
The Leapmotor B10 67.1 kWh is equipped with cast-iron disc brakes on both the front and rear.
Regenerative Braking
Regenerative braking works in two ways: through one-pedal driving, or through the brake pedal using blended braking while coasting.
However, it is not considered full one-pedal driving since, at low speeds, the vehicle will keep rolling until it comes to a stop by itself.Drivers can also adjust the regenerative braking strength when lifting off the accelerator, choosing between three levels.
Exterior
The Leapmotor B10 67.1 kWh is classified as a compact SUV (C-SUV). It measures 4515 mm long, 1885 mm wide, and 1655 mm tall.
The Leapmotor B10 67.1 kWh is available in 6 paint colors, including both solid and metallic options.
You can select from multiple wheel designs, all available in the same size, on the Leapmotor B10 67.1 kWh. The available tire and wheel combinations include:
- 225/50 tires on 18" rims
The car has four regular doors and a liftgate.
The tailgate is electrically powered.
There is only one roof option for this model.
A fixed panoramic glass roof extending from front to rear is standard, making the cabin feel brighter and more spacious. An electric sunshade helps protect occupants from direct sunlight.
Privacy glass from the B-pillar rearward is optional. It reduces glare and solar heat.
Leapmotor B10 67.1 kWh
Interior
The interior of the Leapmotor B10 67.1 kWh is functional, with medium-quality materials used throughout. It includes a floating center console that creates an open space between the passenger and driver. The overall design prioritizes practicality and ease of use.
Seats
The Leapmotor B10 67.1 kWh accommodates five passengers with two front seats and a three-seat bench in the rear.
First Row Seats
The Leapmotor B10 67.1 kWh offers a single type of front seat.
The following functionalities are available on the seat:
- Fore-and-aft adjustment (electrically adjustable)
- Recline adjustment (electrically adjustable)
- Height adjustment (electrically adjustable for driver, not available for passenger)
- Height adjustable headrest (manually adjustable)
- Heating
- Ventilation
Available in:
- Purple leatherette upholstery
Leapmotor B10 67.1 kWh
Second-Row Seats
The second row features a standard three-seat bench with a 60:40 split, allowing each section to fold separately to increase cargo space.
Additional second-row features include:
- ISOFIX (standard for outer seats)
Leapmotor B10 67.1 kWh
Interior Storage
The Leapmotor B10 67.1 kWh has the following interior storage:
- Cupholders: Two cupholders are located in the front center console, with an additional two in the rear armrest.
Interior Lighting
The Leapmotor B10 67.1 kWh offers several interior lighting options.
- Multicolor Ambient Lighting: Across the dashboard, door panels, and footwell, with selectable colors.
Climate System
There is one climate system available:
- 1-zone climate system: Controls a single zone for the whole cabin.
A standard heat pump reduces heating energy use in cold weather.
User Interface and Control
The Leapmotor B10 67.1 kWh uses a primarily screen-based interface while retaining steering-column stalks and a limited number of physical buttons.
This model features a dual-screen setup that separates driver information from infotainment functions.
Key screen details:
- Steering Column Display: The 8.8-inch screen is mounted directly on the steering wheel column. This compact display shows essential driving information such as speed, range, and navigation prompts.
- Center Dashboard Touchscreen: The 14.6-inch touchscreen is located at the center of the dashboard. It serves as the main interface for infotainment, navigation, and vehicle settings.
The Leapmotor B10 67.1 kWh does not have a head-up display. Speed and navigation information remain on the vehicle's other displays.
Leapmotor B10 67.1 kWh
Steering Wheel
The Leapmotor B10 67.1 kWh is equipped with a single type of steering wheel:
The steering wheel adjusts for tilt and reach. The adjustment is manual.
Design: Circular flat-bottom
Controls: Physical buttons, Scroll wheels
Heating: Heated (standard)
Voice control is standard.
Infotainment
The Leapmotor B10 67.1 kWh features a custom-built infotainment system with navigation, media, and vehicle settings.
Navigation System
The built-in navigation system helps you navigate to your destination with ease. It also provides real-time traffic information, ensuring an efficient and stress-free journey. However, it does not support route planning with charging stops, requiring you to plan your charging stops manually.
Phone Mirroring
The Leapmotor B10 67.1 kWh supports Android Auto and Apple CarPlay, providing access to compatible phone apps such as Google Maps and Waze on the car's display.
Sound System
The Leapmotor B10 67.1 kWh has one sound system option:
- Leapmotor: Features 12 speakers.
The model includes USB-C connectivity as standard (total: 2).The model includes USB-A connectivity as standard (total: 2).
Mobile App
The Leapmotor B10 67.1 kWh has a mobile app for Android and iOS to manage and monitor the vehicle remotely. Features:
- Locate Your Vehicle: Check the current location of your car.
- Preconditioning: Preheat or cool your car before you start your journey.
- Lock and unlock: Lock or unlock the doors remotely.
- Window Control: Open or close the windows remotely.
- Scheduled Charging: Set a charging schedule.
- Charge Target: Set the battery's target state of charge.
- Find your car: Sound the horn or flash the lights to locate the car.
- Route Planning: Plan your route and send it directly to your car's navigation system.
Lights
Standard Headlights: These use LED technology.
The taillights use LED technology.
Leapmotor B10 67.1 kWh
Advanced Driver Assistance Systems
The Leapmotor B10 67.1 kWh offers standard and optional advanced driver assistance systems (ADAS).
Safety Systems
Anti-lock Braking System (ABS): Standard on the Leapmotor B10 67.1 kWh. It prevents the wheels from locking during braking.
Electronic Stability Control (ESC): Standard on the Leapmotor B10 67.1 kWh. It improves stability during sudden maneuvers and on slippery roads.
Lane-Keeping Assist (LKA): Standard on the Leapmotor B10 67.1 kWh. It applies steering corrections if the vehicle begins to leave its lane.
The Lane Departure Warning alerts the driver if the vehicle begins to leave its lane.
Rear Cross Traffic Alert (RCTA): Optional on the Leapmotor B10 67.1 kWh. It detects vehicles approaching from the side while reversing out of a parking space or driveway.
Forward Collision Warning (FCW): Standard on the Leapmotor B10 67.1 kWh. It warns the driver of a potential frontal collision.
Automatic Emergency Braking (AEB): Standard on the Leapmotor B10 67.1 kWh. It applies the brakes automatically if the driver does not respond to an imminent collision.
Blind-spot Monitoring (BSM): Optional on the Leapmotor B10 67.1 kWh. It detects traffic in the vehicle's blind spots.
Exit Warning: Optional on the Leapmotor B10 67.1 kWh. It warns occupants not to open a door when it detects approaching traffic or another hazard.
Driving Automation
The standard Leapmotor Pilot SAE Level 2 system includes the following driving automation features:
- Adaptive Cruise Control (ACC)
- Lane Centering Assist (LCA) / AutoSteer: Centers the vehicle in its lane and adjusts speed in traffic. The driver must keep their hands on the steering wheel and remain attentive.
Sensors & Cameras
This model uses cameras, radar, LiDAR and ultrasonic sensors for its driver assist systems.
The vehicle’s surroundings are monitored by radar sensors (three), LiDAR sensors (one), cameras (seven), and ultrasonic sensors (12).
Safety
The Leapmotor B10 67.1 kWh is equipped with the following airbags:
- Front airbags for the driver and front passenger
- Side curtain airbags for both the first and second rows
- Side airbags for the driver and front passenger
- A front-center airbag that reduces the risk of the driver and front passenger colliding with each other during a side impact
Security and Access Technologies
The Leapmotor B10 67.1 kWh includes the following security and access features:
- Keyless Entry and Start: Unlock and start the car with the key in your pocket or bag.
- Phone-as-Key Functionality: Use your smartphone as a digital key to unlock and start the vehicle.
- Alarm System: Monitors for unauthorized entry or tampering and sounds the alarm when triggered.
Cargo Capacity and Towing Ability
The trunk offers a cargo capacity of 430 liters (15.2 cu ft). With the rear seat folded down, this expands to 1700 liters (60.0 cu ft).
The frunk (front trunk) has a capacity of 25 liters (0.9 cu ft).
The maximum permitted vehicle weight is 2345 kg (5170 lbs), and the base curb weight is 1770 kg (3902 lbs). This leaves a payload of 575 kg (1268 lbs), including occupants. Options can increase curb weight and reduce payload.
A towbar can be added to the vehicle. The maximum permissible weight for a braked trailer is 750 kg (1653 lbs), while for an unbraked trailer, it is 750 kg (1653 lbs).
Availability & Pricing
The Leapmotor B10 67.1 kWh had its world premiere on 10/15/2024, with deliveries starting in October 2025.
This model is available in Europe and China.
Pricing
Pricing may vary depending on local conditions, incentives, and promotions. Below are the starting prices for select countries:
- £31,495 (United Kingdom)
- €31,495 (Netherlands)
- €32,400 (Germany)
- AUD41,990 (Australia)
Alternatives to Leapmotor B10 67.1 kWh
Compare These Vehicles
Get detailed side-by-side comparisons of specifications, range, charging performance, and travel capabilities.
Complete Specs
Compare all technical specifications side-by-side
Range Analysis
Real-world range and charging performance
Travel Calculator
Plan trips and compare travel times
